The lumber is stacked in neatly folded bags. Approximate dimensions of the package in height and width are 1100 mm x 1100 mm +/- 50 mm. In one bundle, there should be a sawn timber of the same size in width, thickness, length and wood. Gaskets are installed through a uniform distance through each row of material. Rows of gaskets should form a straight vertical line. The first row of gaskets is installed at a distance of no more than 30 mm from the edge of the pack, the subsequent rows of gaskets with a maximum distance of 600 mm. As pads are allowed only bruski from spruce and aspen thickness of 22-25 mm. Gaskets and front bars can not be longer than the total width of the pack. Each bundle should be bundled with at least three ribbons, which are installed along the line of the gaskets so that the tape overlaps the gaskets. The use of steel tape 16-22 mm is allowed. On the upper row of boards under the tape lay a board 10-26 mm thick and 50-100 mm wide, so as not to damage the upper boards. The length of the underlay must match the width of the pack. You can also use special plastic corners, which are placed under the tape at the corners of the upper row of material. Front panels under the bundle should be 75 x 75 mm in width / thickness. Each pack must have at least three stands.